Bearing elements of the selected 10 |
来源: 时间:2010-7-9 |
We choose when the bearings are all those factors to consider it today, and everyone one to address this issue. The main radial load bearing for the radial bearings. These bearings nominal contact angle a0 <= 45 0. Foot rain than the same ball bearing roller bearing can withstand greater radial load. The main load bearing axial thrust bearing generally, it is the nominal contact corner a0> 450. Thrust bearing and thrust angular contact ball bearing according to different structures can withstand one or two directions of axial force. When an especially high tolerance to the optimal use of thrust cylindrical roller bearings and spherical roller thrust bearings. Supporting a shaft and bearing usually a combination of fixed bearing and the bearing structure of swimming. Swimming the length of the bearing axis error compensation and thermal expansion. Bearings can not be separated (such as deep groove ball bearings and spherical roller bearings) also can be used for swimming bearings. These bearings use two rings in a match, there is no fixed axial surface. Therefore, bearing a ring in the supporting surface activities. This is a ring of the bearing can be installed separately, when the two rings have the advantage of using tight fit very prominent. In most cases, application of the general size and rotation of the bearing accuracy is sufficient. When higher, the bearings need a higher level of accuracy, Neutral does not appear in the processing of journal bearing with surface or with the surface, especially with the surface of the processing equipment is not in a completed card. Also have use when bearing misalignment, (for example: flange bearing or plummer block). As the work load so that the shaft bending deformation, resulting in the bearing inner and outer rings tilted, will also appear misalignment. Separate special low friction bearings, so you can achieve maximum speed. These bearings have only radial deep groove ball bearings and the load can withstand the combined load of the angular contact ball bearings. With a conical bore tapered bearings can be installed directly to the journal (for example: high-precision structure of the single and double row cylindrical roller bearings). When installing this type of bearing can be adjusted out of given radial clearance. Bearing stiffness is usually directed to some extent the elastic deformation of the bearing force required. Spindle and pinion shaft bearings are required to have a high stiffness. As the rolling elements and raceway contact conditions are different, roller bearing stiffness than ball bearing stiffness. In addition to heating and cooling is, the internal friction of the bearing operating temperature also played a significant role in the decision. Low friction bearings are: radial load of deep groove ball bearings, single row angular contact ball bearings with a cage and cylindrical roller bearings. Contact sealed bearings, full complement cylindrical roller bearings and thrust roller bearings will have a greater friction. |
Contact us
- Zhenjiang RuiKai Bearing Co., Ltd.
- Eastern suburbs of Zhenjiang City, Jiangsu Province, Xin Feng Road
- Telephone: 86-0511-83331866
- FAX: 86-0511-83331201
- E-mail: jszjwy@126.com
- E-mail: rkbearing@hotmail.com